top of page
Industrial compliance specialist reviewing steel export cargo and emissions data for EU CBAM requirements.

EU CBAM 2026: What Turkish Industrial Exporters and EU Buyers Need to Verify Now

Oct 30
8 min read

The EU Carbon Border Adjustment Mechanism moved from transitional reporting to its definitive regime on 1 January 2026. For industrial trade, that change matters before a shipment reaches the border: EU importers now need to manage authorisation, embedded-emissions data, annual declarations and CBAM certificates, while non-EU producers increasingly need to provide structured and verifiable emissions information to their customers.


For Turkish industrial suppliers, CBAM is therefore not only an EU importer's compliance issue. The quality, timing and verification status of the producer's emissions data can influence the buyer's reporting method, administrative workload and eventual carbon cost.


By late October 2026, the European Commission had published corrected default values, ten implementation guides for non-EU operators, verification guidance, the first three quarterly CBAM certificate prices for 2026 and updated practical material for the first annual compliance deadline on 30 September 2027.


EU CBAM 2026: What Changed in the Definitive Regime


The transitional phase from October 2023 through December 2025 focused mainly on reporting. The definitive regime, effective from 1 January 2026, adds the financial and authorisation architecture that CBAM was designed to introduce.


EU importers of in-scope goods, or their indirect customs representatives where applicable, must determine whether they fall within the authorisation and annual declaration requirements. The first annual CBAM declaration will cover 2026 imports and is due by 30 September 2027, together with the corresponding surrender of CBAM certificates.


CBAM certificates relating to 2026 imports are not purchased during 2026. The European Commission states that purchases through the common central platform begin from February 2027.


Who Is Directly Liable — and Why Non-EU Suppliers Still Matter


The legal CBAM declarant is on the EU side: normally the authorised EU importer or, in certain structures, an indirect customs representative. A Turkish producer does not buy or surrender CBAM certificates simply because it exports a covered product to the EU.


That does not make the producer operationally irrelevant. Where the importer uses actual embedded-emissions values, the non-EU producer is the source of the installation and production data that supports those calculations. Actual emissions used in the annual declaration must be verified under the CBAM verification framework.


In practical sourcing terms, CBAM turns emissions-data readiness into a supplier-qualification issue. A technically acceptable product can still create compliance friction if the supplier cannot provide the required emissions information in a controlled and verifiable form.


The 50-Tonne Threshold: What It Does and Does Not Mean


The 2025 CBAM simplification introduced a single mass-based de minimis threshold of 50 tonnes per importer per calendar year. It applies cumulatively across the mass-based CBAM sectors of iron and steel, aluminium, cement and fertilisers.


If an importer remains at or below the applicable threshold for the year, the de minimis exemption can remove the CBAM obligations covered by that rule. If the threshold is exceeded, the Regulation applies to the relevant in-scope imports for that year, including the annual declaration and certificate obligations.


The 50-tonne rule should not be applied mechanically to electricity or hydrogen, which are within CBAM but are not part of the same mass-based threshold structure. Product scope and threshold treatment should therefore be checked against the actual CN code and sector rules.


On 30 September 2026, the Commission reported that the current 50-tonne threshold would exempt 0.87% of embedded emissions for the assessment period from 1 April 2025 to 31 March 2026, remaining below the 1% limit used in the Regulation's threshold review mechanism.


Which Products Are in Scope


CBAM currently covers selected goods in six sectors: cement, iron and steel, aluminium, fertilisers, electricity and hydrogen.


Commercial product names alone are not sufficient to determine legal scope. The relevant customs classification and CN code must be checked against the CBAM product coverage. This is particularly important for engineered steel products and downstream items whose commercial descriptions may not reveal whether a specific CN code is included.


Actual Emissions vs Default Values


For the definitive regime, an importer may use the methods permitted under the CBAM rules, including Commission default values or actual embedded-emissions values where the applicable conditions are met.


The distinction is commercially important. If actual values are used, the producer outside the EU must provide emissions data that can support the importer's declaration, and those actual emissions must be verified by an accredited verifier. If default values are used, the importer relies on the legally applicable default-value framework rather than an unverified supplier estimate.


The Commission published corrected definitive-period default values in August 2026. The downloadable spreadsheet is provided for information, while the legally binding values are established through the relevant implementing regulation. Buyers and suppliers should therefore avoid treating an old spreadsheet, transitional-period value or internally estimated carbon intensity as a current legal default.


Verification Is Now an Operational Workstream


Verification is no longer a future concept. The Commission's 2026 timeline provides for accredited CBAM verifiers to register in the CBAM Registry and begin first verification work from September 2026. Verification reports for the 2026 compliance year can be issued from January 2027.


Independent verifier and plant engineer reviewing industrial production data for CBAM embedded-emissions verification.

For suppliers planning to support customers with actual emissions data, the practical preparation should already be underway. The operator needs a defensible monitoring and calculation process, a controlled data trail and records that allow an accredited verifier to review the installation and product-level emissions calculation.


The European Commission published ten guidance documents for non-EU operators in August 2026, including general implementation guidance, calculation methodology and sector-specific guides for cement, hydrogen, fertilisers, iron and steel, aluminium and electricity. Türkiye's Ministry of Trade subsequently published links and summaries for these definitive-period guides.


CBAM Certificate Pricing in 2026


CBAM certificate pricing is linked to EU ETS auction prices. For 2026, the Commission calculates a quarterly price; from 2027 onward, pricing moves to a weekly basis.


  • Q1 2026: EUR 75.36 per CBAM certificate.

  • Q2 2026: EUR 75.28 per CBAM certificate.

  • Q3 2026: EUR 82.32 per CBAM certificate.

  • Q4 2026: scheduled for publication on 4 January 2027.


These figures should not be read as a flat surcharge per tonne of imported product. A CBAM certificate corresponds to emissions, not product mass. The final number of certificates to be surrendered depends on the embedded emissions calculation and applicable adjustments, including the free-allocation adjustment and, where the legal conditions are met, a carbon price effectively paid in a third country.


What Turkish Industrial Suppliers Should Prepare Now


A supplier does not need to become the EU declarant, but it does need to understand what the EU customer will ask for. A useful preparation sequence is:


  1. Confirm the product's customs classification and whether the relevant CN code is within CBAM scope.

  2. Identify the producing installation and production route that generated the exported goods.

  3. Agree with the EU customer whether the transaction is expected to use actual emissions data or the applicable default-value route.

  4. Maintain a controlled monitoring and calculation record rather than assembling emissions data only after the buyer requests it.

  5. If actual emissions will be used, plan the verification route with an appropriately accredited verifier and allow enough time for document review and any site work.

  6. Keep evidence of any carbon price effectively paid where it may be relevant to a lawful CBAM deduction, including records of rebates or compensation that affect the effective amount.

  7. Control document versions so that emissions reports, product references, production periods and shipment records do not become mixed across orders.


What EU Buyers Should Request from Suppliers


EU buyers should avoid a vague request for a supplier to provide a 'CBAM certificate'. CBAM certificates are purchased and surrendered by authorised declarants; they are not a generic compliance certificate issued to a non-EU supplier.


Instead, the sourcing or compliance request should identify the data actually needed. Depending on the transaction, that may include:


  • producer and installation identification;

  • product and CN-code mapping;

  • production route and relevant reporting period;

  • embedded-emissions data and calculation basis;

  • whether values are actual or default;

  • verification status and verifier details where actual emissions are used;

  • evidence relevant to a carbon price paid in a third country where a deduction is contemplated;

  • a deadline for supplier data that leaves time for importer review and correction before the annual declaration.


How CBAM Should Enter the RFQ and Sourcing Process


For covered industrial goods, CBAM should be considered during supplier evaluation rather than after the order is placed. An RFQ or sourcing review can ask whether the producer has a defined CBAM monitoring approach, whether verified actual data can be supplied, which installation produces the goods and what lead time is required for the necessary emissions information.


This is not a substitute for legal compliance review. It is a commercial screening step that helps the buyer identify whether a supplier is likely to support the data requirements of the transaction.


CBAM Is Separate from Tariffs, Quotas and Trade Remedies


CBAM does not replace ordinary customs classification, customs duties, tariff quotas, anti-dumping measures or other import restrictions. The same shipment can be affected by more than one regulatory or commercial mechanism.


For a separate review of quota exposure in steel trade, see SAYIMO's guide: EU Steel Tariff Quotas in 2026.


For trade-remedy screening, see: Antidumping vs Countervailing Duties.


A sourcing decision should therefore separate three questions: Is the product technically acceptable? Is the import commercially and logistically feasible? And what regulatory obligations apply to that specific origin, CN code, importer and transaction structure?


Practical CBAM Timeline for 2026–2027


  • 1 January 2026: CBAM definitive regime begins.

  • 14 August 2026: European Commission publishes ten definitive-period guidance documents for non-EU operators.

  • September 2026: accredited verifiers can register in the CBAM Registry and begin first verification work.

  • 5 October 2026: Q3 2026 CBAM certificate price published at EUR 82.32.

  • January 2027: first verification reports for 2026 actual emissions can be issued; Q4 2026 certificate price is scheduled for publication on 4 January.

  • February 2027: CBAM certificate purchases for 2026 imports begin through the common central platform.

  • 30 September 2027: first annual CBAM declaration for 2026 imports and the corresponding surrender of certificates are due.


What Buyers and Suppliers Should Not Assume


  • Do not assume that a product is outside CBAM because its commercial name does not sound like a basic material; check the CN code.

  • Do not treat a COA, TDS or ordinary shipment certificate as proof of embedded emissions.

  • Do not assume the 50-tonne threshold applies identically to every CBAM sector.

  • Do not treat the published certificate price as a flat cost per tonne of product.

  • Do not assume an Incoterms® rule by itself determines the full CBAM compliance structure; the importer, customs representation and actual regulatory setup matter.

  • Do not wait until the annual declaration deadline to discover that supplier emissions data or verification evidence is incomplete.


What to Include in a CBAM-Relevant Industrial Sourcing Inquiry


Where an industrial requirement may fall within CBAM, buyers can make the sourcing review more efficient by providing the product, grade or specification, CN code if known, quantity, origin, producing installation if known, EU destination, intended importer structure and any existing emissions or verification documentation.


SAYIMO supports specification-led industrial sourcing and cross-border trade coordination on an inquiry basis. The objective is to identify technical, supplier, documentation and commercial issues early enough for the buyer to make an informed sourcing decision.


Buyers with a defined requirement can submit an industrial sourcing inquiry for preliminary technical and commercial review.


Sources and Verification


European Commission — CBAM Definitive Regime


European Commission — CBAM Communication and News


European Commission — CBAM Legislation and Guidance


European Commission — Price of CBAM Certificates


European Commission — CBAM Verification



Republic of Türkiye Ministry of Trade — EU CBAM Definitive-Period Guidance Documents


Disclaimer


This article is provided for trade-intelligence and commercial-screening purposes and does not constitute legal, customs, carbon-accounting or regulatory advice. CBAM obligations depend on the specific product, CN code, importer, origin, emissions methodology and transaction structure. Current EU legislation and competent-authority guidance should be checked for the specific case.

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.

© 2026 SAYIMO Global İç ve Dış Ticaret Anonim Şirketi. All rights reserved.

  • X
  • Facebook
  • LinkedIn
  • Whatsapp

Website designed by Autorise Agency | www.autoriseagency.com

bottom of page